HMI Problem

[zorro_66]

I have tried to do the function block
But i just get "build fail."
Do I have to write any more parameter in the block or matter it works directly

FUNCTION_BLOCK IntlToSec
	VAR_INPUT
		seconds_int: int;
	END_VAR
	VAR_OUTPUT
		out_time : TIME;
	END_VAR

out_time := mul_time(time#1s, seconds_int);
END_FUNCTION_BLOCK

[tomas_hora]

@zorro_66 is there any more info for the message Build fail?

[zorro_66]

Indicates that it is wrong in any column
But the error changes depending on where I have the cursor standing

[tomas_hora]

@zorro_66 Could you share the project? That might be easier to debug...

[zorro_66]

How can I send the project to you i tried to mail but it did not work.
I can not upload this one has no privileges so it's enough

[tomas_hora]

@zorro_66 Zip the archive and send me a link to google drive/dropbox or any other file sharing service...

[zorro_66]

Hello
Tomas, you've probably got a link to Dropbox and my project
Sorry it took some time to fix but i have been on vacation

[tomas_hora]

@zorro_66 All input variables of a function block has to be connected or checked as not visible and set a default value. That is missing in your BD13_SwitchOffDelay of Interlocks program.

The second issue is, that in the PLC program mapping, you have mapped two programs that do not exist...

[zorro_66]

Thanks for the quick reply Tomas
Well, I know I had nothing connected to that block but did not think it was the fault.
Because it's on the position my time_Converter was supposed to enter.
Which two programs have I mapped that are not available

[tomas_hora]

@zorro_66 if you double click on the error in the result table, it will usually show you where the issue is... Or just read what it says.