Topics created by actiwerks

This is where it gets weird. My OWBUS section is as follows :

[OWBUS_1]
owbus = /dev/i2c-1 --i2c=/dev/i2c-1:ALL ; Scanned bus (--i2c=/dev/i2c-1:ALL or localhost:2122 or 'u' for USB dongle)
interval = 3 ; [s] Default sensor reading
scan_interval = 300

That means the scan is 300 miliseconds, correct? I only have one sensor connected, but the Evok web interface still shows values from two sensors...looks like it stopped updating after first read. Any ideas ?

@Vesa-Kauppinen
Glad to hear it works now!

EVOK 2.0 should work fine UniPi 1.1, but obviously much of the extra hardware functionality which Neuron has will be missing.

The UniPi 1.1 also has an EEPROM, it's just in a slightly different format. The reason that the installation needs to know which hardware you have is that we need to install certain different libraries to get the hardware to work correctly. Unfortunately this cannot be done automatically, as the EEPROM is not loaded during the installation yet.