Topics created by burnscm

Hello @burnscm,
thanks to you, we have discovered that the package unipi-kernel-modules v1.54 for Neuron has been incorrectly built. It is now fixed and new OpensourceOS image has been built.

I recommend to download the said image (https://kb.unipi.technology/_media/files:software:os-images:neuron-opensource-os_image-20210105.0.zip) and do apt update && apt install -y evok.

Thank you for understanding and have a nice day,
Martin

Hello @burnscm,
moreover, the Modbus doesn't allow to have address 0 and you cannot set the address 0 via our DIP switches. When the DIP switches are in "0" position, the extension uses the address which is stored in the NVRAM, which, by default, is 15.

Best regards,
Martin

Hi,

I tried to control a Neuron xS10 directly via ModbusRTU over FHEM but I can't get it work :-(

I tried this in my fhem.cfg

#Neuron xS10 define NeuronModbus Modbus /dev/ttyUSB0@19200,8,N,1 define NeuronxS10 ModbusAttr 0 60 RTU define DigitalOut1 ModbusCoil 0 0 attr DigitalOut1 IODev NeuronxS10 attr DigitalOut1 event-on-change-reading .*

The RX-Led on the extension stay's green. But I can't get a relay to change between on/off. No LED of an relay ist getting on.

So is there anybody who could help me please or give me an hint to an conclusion?

Thx a lot

Negropo

Thanks for the license!