Topics created by Gif

Thanks,
that was it.
I seen that file in old Mervis, but thought that it is older version of Lib.UniPi,
but also was blind and don't see it in on download page.
Thank you very much, now it works.

Just for info.
For me it works with DS2413 (1wire dual channel switch), at least in output mode.
I used library for DS2408 (1W-8R) and only modified family number.

There is no support for audio output yet for any software I came across that works with UniPi so it it up to users how they deal with it…

Right now it is root:raspberry but it will be possible to enable/dosable ssh and change root password in the future via web interface

Problem byl vyresen a objevi se v pristi verzi instalace IDE - ocekavame behem tydne az dvou.

Hello,

I did not have a chance to test it but it definitely should! If you need a standalone PLC like, then it is a perfect match

Let me know if you got one in hands and test it with UniPi

Hello,

solid state relays are ideal for switching LED lights, see the datasheets below for more information. If you use adequate cooling for the load it will withstand for years. I would not much bother with the minimal load, but check the datasheet.

Yest SSRs are great because of switching at zero.

http://www.sharp-world.com/products/dev ... 2s02_e.pdf
https://www.omron.com/ecb/products/pdf/en-g5q.pdf

Dobry den,

OpenTherm kontroler/extension je ve fazi testovani. Pokud byste mel zajem, kontaktujte nas prosim na info@unipi.technology.