Topics created by Iogo

You can do this easily with a simple function block, specifically Integer Scheduler (T19), or Bool Scheduler (T17). Signal from these can be used to trigger a function block which sums the value from a counter to some stored value, and the nulls the counter afterwards.

I recommend looking through some online tutorials on function block diagrams (FBDs) and structured text (ST), as well as thoroughly reading the "help" topics in the IDE (press F1).

@Martin-Kudláček it works, but you have to attach using the "Use deploy parameters" as described a few posts above

They are mapped to hw, although the name does not imply that. Exactly as in your example. Did not get it to work, so I decided to add a modbus device, 4 channel analog output module and take the pt1000 temperatures through another modbus device...seemed easier way to go =)

@Iogo You can use for measuring block T32.

Thanks. That is more than adequate for this purpose I am going to use it for :)

@Iogo I have just tried opening the example and worked well.. But the .touch HMI project file is placed in the bin folder. Please test it.

@Iogo You are using block with delay. Maybe the error is, that time of delay is implicitly set to 30 seconds. Try to reduce time to 0 second and debug it. Did it help you?