Topics created by MMCreativ

Hi @mmcreativ,
the issue might arise, if you try accessing the IP 192.168.8.91 from another subnet. The WiFi interface doesn't have default gateway set, therefor it doesn't know how to reach different subnet. Could this be the issue?

Best regards,
Martin

Hello @mmcreativ,
there isn't a reboot counter per-se, but you can work with the PLC uptime. This is provided by block "PLC Time (B99)".

Best regards,
Martin

Hello @mmcreativ,
there is no card inside of the PLC. It looks like the M205 isn't properly flashed or there is some HW error. Please, let's continue about the detail over email support@unipi.technology. Send us an email with this information:

serial number of the PLC first photo or better yet a video of the top cover of the PLC with clear indication of the LED

Thank you and have a nice day,
Martin

@mmcreativ Unfortunately the source project is not stored on the PLC so there is no way to recover it.

@ikiiwii Wifi Configuration is not yet implemented in Mervis, so you would have to configure the wifi client in linux using ssh. Then you will setup SSCP communication between those 2 Neurons.

Then I would suggest you to study the API. It really allows you to have "gateway" that acts as a real MervisDB. In MervisIDE you would point the "Mervis DB parameters" to http://your.server.com/save and your software on this server can store the data internally to MySQL, InfluxDB or wherever you like.

Adding a custom JS scripts into HMI is not supported.

Can you post a diagram of how you connected the light? If the light is an LED panel you may have to use a specialised external relay, as LED panels can have very high inrush current (>3 orders of magnitude higher than operating current usually).