Topics created by msoenen

Hello @msoenen,
please send the project alongside with the version of the MervisIDE you are using to support@unipi.technology.

Thank you,
Martin

Hello

Thanks for answer

I will try to make a backup power supply with batteries so as not to have sudden stops

Problem solved, I did a complete reinstallation in version 2.2, because version 2.3 does not work for me

thanks

Hello @msoenen,
try looking into BD86 Filter.

Best regards,
Martin

@iVar

The old Mervis SCADA app was removed by Google from their Play Store. New Mervis SCADA with a new app is being developed.

Hello @msoenen,
so far we don't have a support for this platform. It would require to write a bridge between our API (Evok probably) and the API of the my-devices.

Best regards,
Martin

@tomas_hora Don't forget us for the evolution of the scada and the mobile app
Thank you for your work and your help when we have problems
happy new year 2020

Hello @msoenen,
any SD card you bought from us is empty - we don't preinstall any operating system.

I would recommend flashing a UniPian to the SD card. The UniPian is Raspbian with preinstalled packages that allow communication with IO boards.

The UniPian image can be downloaded here: https://kb.unipi.technology/files:software:os-images:00-start
And here is a tutorial how to flash the MervisOS image to the SD card and you can use parts of it for flashing the UniPian image as well: https://kb.unipi.technology/en:sw:01-mervis:running-on-neuron-hidden

Best regards,
Martin

@msoenen The status should be CONNECTED in the PROXY field. If you see disabled, then the configuration is not done properly. Anyway, Mervis requires the port 6677 to be allowed for outgoing connection in order to make the proxy work.

@msoenen actually not, just test what I wrote in my previous post

@tomas_hora
hello, I found a solution to turn a digital setter into push-Button
I put a flip-flop that reset after 2 seconds the variable on which points the digital setter HMI
https://www.dropbox.com/s/dvf4toi76z35kxw/Capture d'écran 2019-01-10 09.56.36.png?dl=0

@robl

ok it works, but I was forced to delete the old variables and replace them in the program
it is a pity that there is no table with troublechoottings in which could look during malfunction but without the system does not default