t.kavan

t.kavan

Hi all, is here anyone with a knowledge to properly setup RS485/M-Bus converter from JC Elektronika?

My testing setup:

Unipi Patron M527 with Patron Node RED OS installed and libmbus 0.8.0,
80 device version of RS485toMBus-XL connected to 1.3 port RS485,
Electricity meter Inepro PRO380Mb (Addr set to 9, Bdr set to 1200).

mbus-serial-scan tool seems to find the meter:

unipi@M527-snXXX:~$ mbus-serial-scan -d -b 1200 /dev/ttymxc0 
Scanning primary addresses:
...
9 [2024-06-09 09:23:07] SEND (005): 10 40 09 49 16
[2024-06-09 09:23:07] RECV (001): E5

Found a M-Bus device at address 9
...

but mbus-serial-request-data tool is not able to read response:

unipi@M527-snXXX:~$ mbus-serial-request-data-multi-reply -d -b 1200 /dev/ttymxc0 9
main: debug: sending init frame
[2024-06-09 09:15:20] SEND (005): 10 40 FF 3F 16
[2024-06-09 09:15:21] SEND (005): 10 7B 09 84 16
mbus_sendrecv_request: Failed to receive M-Bus response frame.
mbus_frame_print: Dumping M-Bus frame [type 0, -3 bytes]: 
Failed to generate XML representation of MBUS frames: M-bus data parse error.

If I use M-Bus master from ENBRA (USB-MBus) CODMBUS the read tool is ok to read the meter:

unipi@M527-snXXX:~$ mbus-serial-request-data -d -b 1200 /dev/ttyUSB0 9
main: debug: sending init frame
[2024-06-09 09:05:30] SEND (005): 10 40 FF 3F 16
[2024-06-09 09:05:30] SEND (005): 10 7B 09 84 16
[2024-06-09 09:05:31] RECV (081): 68 4B 4B 68 08 09 72 08 05 08 21 CD 25 01 02 2D 00 00 00 0C 04 61 77 26 00 8C 10 04 61 77 26 00 8C 20 04 00 00 00 00 1C 04 61 77 26 00 9C 10 04 61 77 26 00 9C 20 04 00 00 00 00 2C 04 00 00 00 00 AC 10 04 00 00 00 00 AC 20 04 00 00 00 00 83 16
mbus_frame_print: Dumping M-Bus frame [type 4, 81 bytes]: 68 4B 4B 68 08 09 72 08 05 08 21 CD 25 01 02 2D 00 00 00 0C 04 61 77 26 00 8C 10 04 61 77 26 00 8C 20 04 00 00 00 00 1C 04 61 77 26 00 9C 10 04 61 77 26 00 9C 20 04 00 00 00 00 2C 04 00 00 00 00 AC 10 04 00 00 00 00 AC 20 04 00 00 00 00 83 16 
<MBusData>

    <SlaveInformation>
        <Id>21080508</Id>
        <Manufacturer>INM</Manufacturer>
        <Version>1</Version>
        <ProductName></ProductName>
        <Medium>Electricity</Medium>
        <AccessNumber>45</AccessNumber>
        <Status>00</Status>
        <Signature>0000</Signature>
    </SlaveInformation>

    <DataRecord id="0">
        <Function>Instantaneous value</Function>
        <Unit>Energy (10 Wh)</Unit>
        <Value>267761</Value>
        <Timestamp>2024-06-09T09:05:31</Timestamp>
    </DataRecord>

...

I would appreciate any idea what I'm doing wrong. Thanks!

t.kavan

@t.kavan

Latest posts made by t.kavan