https://www.unipi.technology/unipi-neuron-l513-p106?categoryId=2

“9 analog outputs (AO) feature two modes - 0-10V DC voltage or 0-20mA direct current. AI serves for control of devices with analog input, such as three-way valves, lighting dimmers etc. Group 2 analog outputs of the M503 (AO2.1-2,4) feature 0-10V voltage only.”

From the above we understood that all the AO have the option to switch to current...

Hi @Martin-Kudláček, we used the stock image from here https://kb.unipi.technology/_media/files:software:os-images:unipian-neuron-os-2019-01-07-v1.9.zip
Today tried to install evok on a stock Raspbian image and now have access to all relays. But a different problem arose. By L513 spec all the analog outputs 3_0* should be dual mode - current or voltage. In the evok web interface don't have the option to choose between voltage/current for those AO's, it's only voltage.
Am I doing something wrong, there's a different way to set AO to be current?

Hello,

I have a problem with evok and L513. Can't access any relay from 2_01 to 2_05 from evok web interface or api.
What I'm doing wrong? Do I need to enable anything in evok config?

thanks