Topics created by Bart Delaere

Hello @Bart-Delaere,
unfortunately there is no definitive answer. The 1-Wire bus is technically able to connect huge amount of devices, but reality depends on cable length, quality, noise from the environment etc, so this may be trial and error for users that do not install it daily.

Unipi used to sell a hub/splitter, which we do not offer anymore.

Sometimes, a surge can occur in the environment, which can take down the whole bus. Unipi units (except Unipi 1/Lite) have an option to restart the bus (the bus is not restarted during normal system reboot), you can look in the Modbus table of your unit if you wish to implement it.

Is nobody using the Analog output (0-10V) to dim LED lights?

Hello @bart-delaere,
the easiest way is to use a simple DIV function block, via which you will divide the setpoint variable value by 10 before sending to AO:

0_1583141012535_659668b8-6d3a-4251-ac0c-8948a61f4ec4-image.png

More systematic way, yet more prone to errors, is to use transformation on the write variable:

0_1583141099892_89fcce66-eb68-4314-b109-fc9e12a52575-image.png

Best regards,
Martin

@Bart-Delaere
The issue should now be fixed both in Master and in the latest release. v.2.0.5f

As a side note you can now query the version of your EVOK via /version/, though unfortunately it only applies from v.2.0.5f onwards.