Topics created by zorro_66

Hello @zorro_66,
the problem with 1-Wire bus is, that there are no guarantees about its functionality. You may have 10 sensors on 100m bus working just fine and you can have 5 sensors on 20m that will not work at all.

The general guidelines are:

Avoid stub and star topology (e.g. use our 4 wire sensors) Use shielded cable and don't lay the cable along the 230V power lines

For more detailed information, try reading this paper from Maxim: https://www.maximintegrated.com/en/app-notes/index.mvp/id/148

Best regards,
Martin

ok they're just as good then I'll get further troubleshooting
no i know ssl is not working that's why i have a separate relay server

@zorro_66 You have to choose a SMTP server which does not use SSL.

Ok tanks

Yes embarrassing.
Now it has happened to me too
thanks for the help
now it works

@zorro_66 if you double click on the error in the result table, it will usually show you where the issue is... Or just read what it says.

0_1497967748550_Screenshot_5.png

:smiley:

@zorro_66

Hallo zorro

brauchst Du noch Hilfe oder hat sich das erledigt ,ich lasse meine Pumpe damit schalten, Du musst das TPG
in HMI nehmen ,funktioniert wie eine Schaltuhr

Udo

alt text

I have changed Cable now and this should clear all disturbances
and then I have grounded shield in the control cabinet
alt text
alt text

We are sorry for that @zorro_66!

But it is really hard to find out this kind of issue during our test but we will update our testing procedures... Thanks for the info.

@zorro_66 You can, but except the OWFS itself, it is not directly supported in any software that I am aware of...

Ok thanks got it to work now0_1477287266721_analogout4.jpg

Ok tanks

ok tanks

The problem is solved
0_1477044433648_Unipi_Siemens.jpg

Perfect thanks now it works.
[attachment=0:a28bpy12]Analog3.jpg[/attachment:a28bpy12]

But I do not use Evok

Ok thanks for your reply

OK
I will try to see what happens
Just ordered my second Unipi for lab purposes
My first Unipi control my chillers for my server racks
[attachment=0:zhfhxnxj]System.png[/attachment:zhfhxnxj]